Part No: T9464 Category:

VTA T9464 Ford F150 Ecoboost Applications

AUD $367.00

Specific Product Information

Description

INTRODUCING THE NEW VTA BLOW OFF VALVE FOR FORD F150 ECOBOOST APPLICATIONS!

MADE IN AUSTRALIA FOR LEGENDARY PERFORMANCE, WITH A GREAT BLOW OFF VALVE SOUND!

Not just a noise-maker, heart racing sound with power

If you want sound with your performance (or performance with your sound!), Go Fast Bits VTA delivers just that! Rather than just venting that factory diverter valve to atmosphere, the VTA replaces the weak factory valve internals and delivers an aggressive blow off valve sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.

*** REGISTERED PATENTS AND PCT PATENTS PENDING ***

VTA design philosophy: “Keep what works, replace what doesn’t”

This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do.
The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition.

Pilot Operation

Go Fast Bits pioneered the use of “pilot operation” in the DV+ range, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows
the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve.
It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market.

Direct Bolt-On Kit

As you would expect from a Go Fast Bits product, the F150 VTA comes as a direct bolt-on kit. When we say bolt-on, that’s what we mean. Other products use brackets that don’t bolt up to the OEM diverter mount holes, meaning they are useless on aftermarket intercoolers, and because they have to supply two to cover all year models, the brackets are cheap and flimsy.
Our bracket is powder coated stainless steel, and is designed to replicate the footprint of the OEM diverter valve mount. This means it fits all 2013-2020 models, AND aftermarket intercoolers designed to use the OEM diverter valve and bayonet mount. Not only that, the blanking plug is attached to the bracket so it plugs the recirc AND holds it securely in the engine bay.

Features

» TMS Technology for faster boost recovery on gearshift and during throttle modulation
» Improved boost holding ability
» Atmosphere venting for blow-off sound
» Retains ECU control
» Simple, direct bolt-on kits include everything you need to install
» Manufactured in Australia in accordance with ISO 9001

Why choose a VTA when I can vent the stock diverter to atmosphere?

Whilst you can achieve a blow off sound using the factory diverter, you don’t solve any of the performance or reliability issues that are inherent in the factory diverter valve. The VTA improves the operation of the diverter valve for sound AND performance.

Why choose a VTA over other brands that include a solenoid as part of their kit?

Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! The VTA with the factory solenoid IS the fastest, most responsive, and most cost-effective blow-off solution on the market – why pay more than you need to?

About this range

VTA Performance Blow-Off Valve Solution

US Patent Number 10077709

Chinese Utility Patent Nos:  CN206054094U & 206129406

PCT Patents Pending

The VTA is a performance blow-off valve solution for Audi, VW, Skoda and SEAT vehicles with an electronic factory diverter valve.

If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.

The VTA shares the successful DV+ design philosophy:

“Keep what works, replace what doesn’t”

This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do.

The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition.

GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve.

It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market.

Key features:

  • TMS Technology for faster boost recovery on gearshift and during throttle modulation
  • Improved boost holding ability
  • Atmosphere venting for blow-off sound
  • Retains ECU control
  • Simple, direct bolt-on kits include everything you need to install
  • Manufactured in Australia in accordance with ISO 9001

VTA or DV+?

Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet.

Why choose a VTA over a “BOV spacer”?

“BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance.

Why choose a VTA over a kit that includes a solenoid?

Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?

Video Ford F150 VTA

Video Ford F150 VTA

Downloads & Installation
Vehicle Applications

VTA T9464 Ford F150 Ecoboost Applications also suits:

  • FORD USA F150 2.7 & 3.5 EcoBoost (2013-2020)
  • FORD USA F150 2.7 & 3.5 EcoBoost (2013-2020)
  • FORD USA F150 Raptor 3.5 EcoBoost (2017-2020)
  • Ask Our Experts
    Reviews (0)

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.